Once a pair of surfaces is used for *tie, it cannot be used again for *contact pair and vice versa.

以下是status文件相关信息***WARNING: Master surface ASSEMBLY_SURF-CU-3 of contact pair # 5 contains facets with out-of-plane warping of at least 20.000 degrees in increment 22480.

IF BOTH PAIRS ARE *CONTACT PAIRs, THESE TWO PAIRS SHOULD NOT BE SIMULTANEOUSLY PRESENT IN A STEP BECAUSE OF POSSIBLE CONVERGENCE PROBLEMS; USE *MODEL CHANGE,TYPE=CONTACT PAIR TO REMOVE ONE OF THEM.

Initial contact adjustments for resolving gaps and overclosures when a surface with double-sided facets is paired with any surface having double-sided facets may be incorrect.

OP=NEW on *CONTACT is ignored when the general contact definition is specified as model data.

IF BOTH PAIRS ARE *CONTACT PAIRs, THESE TWO PAIRS SHOULD NOT BE SIMULTANEOUSLY PRESENT IN A STEP BECAUSE OF POSSIBLE CONVERGENCE PROBLEMS; USE *MODEL CHANGE,TYPE=CONTACT PAIR TO REMOVE ONE OF THEM.

Please check the model carefully. ”最后：“The dependent term of internal constraint equation 247416 created by contact pair could not be identified.

IN A STEP BECAUSE OF POSSIBLE CONVERGENCE PROBLEMS; USE *MODEL CHANGE,TYPE=CONTACT PAIR TO REMOVE ONE OF THEM.

CONTACT FORCE ERROR -18.3432E-09 AT NODE 270738 OF CONTACT PAIR (S2,S1) THE CONTACT CONSTRAINT ERRORS ARE WITHIN THE TOLERANCES.

SHEAR STRAIN COMPATIBILITY TOLERANCE FOR HYBRID BEAMS 1.000E-05 SOFT CONTACT CONSTRAINT COMPATIBILITY TOLERANCE FOR P>P0 5.000E-03 SOFT CONTACT CONSTRAINT COMPATIBILITY TOLERANCE

Error in job Job-LS: The elements in element set ErrElemConvPartElemInContact are part of a deformable surface that is referenced by a *CONTACT PAIR option in addition to allowing the element to be converted